manualshive.com logo in svg

Akai AK-HPD8S, Instruction Manual

Share
Download
Akai AK-HPD8S Instruction Manual Download Page 31

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

31

Other Useful Information (Cont.)

Responsible disposal

At the end of its working life, do not throw this appliance out with your household waste. 
Electrical and electronic products contain substances that can have a detrimental 
effect on the environment and human health if disposed of inappropriately. Observe any 
local regulations regarding the disposal of electrical consumer goods and dispose of it 
appropriately for recycling and recovery of the refrigerant. Contact your authorities for 
advice on local recycling facilities.

Technical specifications

Rated capacity

8kg

Rated Power, Voltage & Frequency

650W, 220-240V~, 50Hz

Ambient temperature range

+5°C to +35°C

Dimensions and net weight

595 (W) x 630 (D) x 850 (H) mm, approx. 46kg

Refrigerant

R134a (310g)

Compliance

This product has been fully tested and meets all requirements as set out by standards 
AS/NZS 60335.1 and AS/NZS 60335.2.11.

The RCM Mark (Regulatory Compliance Mark) indicates that the product 

complies with the relevant guidelines of the ACMA as well as corresponding 

government requirements for the safety of electrical devices.

E209

Storage

If you are not going to use the appliance for an extended period of time, unplug it and 
store it upright in the original packaging to protect it from dust. Store the unit in a dry 
place, out of children’s reach. 

Service, repair and spare parts

If the appliance is damaged, do not attempt to repair it yourself. If it requires repair or 
service, please contact our after sales support centre to arrange for examination and 
repair. Our after sales support centre stocks spare filters and legs for the appliance. To 
purchase a spare part, contact the centre using the details at the bottom of the page.

Summary of Contents for AK-HPD8S

































Reviews:

No comments

Brands by name

Popular brands

Load more brands