Akai AK-8KGFLW Instruction Manual Download Page 31

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

31

Specifications and technical parameters

Rated capacity (washing/spinning)

8kg

Rated voltage and frequency

230–240V~ 50Hz

Rated power

2000W

Water pressure

0.03MPa – 1.0MPa

Liquid ingress protection

IPX4

Weight

66kg

Dimensions 

600mm (W) x 595mm (D) x 850mm (H)

Other Useful Information (Cont.)

Responsible disposal

•  Packaging materials are recyclable. Please dispose of them responsibly for 

recycling. 

•  At the end of its working life, do not throw this appliance out with your household 

rubbish. Electrical and electronic products contain substances that can have 
a detrimental effect on the environment and human health if disposed of 
inappropriately. Observe any local regulations regarding the disposal of electrical 
consumer goods and dispose of it appropriately for recycling. Contact your local 
authorities for advice on recycling facilities in your area.

Compliance

This appliance has been fully tested and meets all requirements as set out by 
standards AS/NZS 60335.1 and AS/NZS 60335.2.7

NOTE: 

Due to continued product improvement, images and illustrations in this 

manual may vary slightly from the product purchased. All images in this manual are for 

reference purposes only. Parts are not necessarily pictured to scale.

The RCM Mark (Regulatory Compliance Mark) indicates that the product 
complies with the relevant guidelines of the ACMA as well as corresponding 
government requirements for the safety of electrical devices.

E209

Summary of Contents for AK-8KGFLW

































Reviews: