Akai AK-10KGTLW Instruction Manual Download Page 11

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

11

Getting Started: Installation (Cont.)

CAUTION!

•  While the washer is in use, make sure the height of the drain hose is at least 80cm, 

otherwise the washer will not work well, or the water may flow out in the course 
of washing. Also ensure the drain hose is not higher than 120cm above ground, 
otherwise the washer will not drain water well. 

•  Never lay down the drain hose, as water will be discharged. 
•  Be sure the drain hose is properly routed so it will not kink or lift off the sink.

Using the rollers

The washing machine is equipped with two rollers at the back that you can use to 
move the machine more easily. Tilt the washing machine by about 30 degrees and 
push forward, or pull backward, while holding the machine securely on both sides 
with your hands, as illustrated below. 
Do not move the machine on the rollers on uneven ground, which can damage the 
rollers.

CAUTION: 

Take care of your 

back!

 Do not tilt the washing 

machine too much, which could 
cause injury.

Summary of Contents for AK-10KGTLW





























Reviews: