![Akai ADI-19K User Manual Download Page 27](http://html1.mh-extra.com/html/akai/adi-19k/adi-19k_user-manual_2883901027.webp)
26
FM RADIO OPERATION
TUNING THE FM RADIO
1. Power the unit on, switch to TUNER (RADIO) mode by pressing
SOURCE
repeatedly.
2. Press
TUNING
/
button on the unit or
TUN+/-
button on the remote to fine tune radio station.
Press
and
hold
TUNING
/
button on the unit or
TUN +/-
button on the remote to auto search
radio station forward or backward respectively (When an available station will be found, the unit will
broadcast it immediately and the searching will be stopped).
3. During radio playback, you can input the frequency you know to the unit directly through the numeric
buttons. If you want to input the frequency 89.8MHz, press numeric buttons 8, 9, 8, and 0; if you input
a wrong frequency, "
ERROR
" will be displayed on the screen.
4. During radio playback, press
REPEAT/ST
button on the remote to switch between FM STEREO or FM
MONO.
STORING YOUR FAVORITE RADIO STATION
1. During playback, press and hold
PLAY/PAUSE
button on the unit or
TIME SET/MEM
button on the
remote for storing the current station until memory cell number "P01" flashes on the screen.
2. Use
TUNING
/
button on the unit or
TUN +/-
button on the remote to select the corresponding
memory cell among P01-P20 for storing the station.
3. Confirm your selection by pressing
PLAY/PAUSE
button on the unit or
TIME SET/MEM
button on the
remote.
4. During radio playback, press
PLAY/PAUSE
button on the unit or
TIME SET/MEM
button on the
remote repeatedly to recall the stored stations.
iPod/iPhone OPERATION
Any
iPod®/iPhone®
can be connected to the
ADI-19K
to allow all your songs to be played
through the Tower. Please refer the compatibility table for
iPod® and iPhone®
on page 28-29.
Description of iPod® & iPhone Docking Station
The system is supplied with 5 different adaptors intended to insure iPod® & iPhone® models fit
properly in the docking area.
Each adaptor is identified by numbered bracket. Select the adaptor with the numbered bracket
that corresponds to your iPod® or iPhone® model.
Position the adaptor in the docking area as shown and make sure that it ‘locks’ in place, then
place your iPod® & iPhone® into the adaptor and make sure that its connector on this system is
fully inserted into the slot on the bottom of your iPod.
Note:
DO NOT ATTEMPT TO “STRAIGHTEN” YOUR IPOD. THIS COULD RESULT IN DAMAGE
TO THE DOCKING CONNECTOR OR DAMAGE TO YOUR IPOD.