
18
DYNAMIC RANGE CONTROL
● Select the value (AUTO, ON or OFF).
Digital audio setup
DIGITAL OUTPUT
● Select SPDIF/OFF to switch off the digital audio signal output.
● Select SPDIF/RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF/PCM to set the digital audio signal output to PCM format.
LPCM OUTPUT
This option is only available when SPDIF/PCM is set.
● Select a sample rate for the digital audio output.
There are two options: 48 kHz and 96 kHz.
i
Before switching this option off, check that the amplifier connected
is compatible with 96 kHz digital signals.
Channel delay
This function is used to set the delay time for the centre and rear speakers
and the subwoofer. The delay compensates for the time difference caused
by the distance differences between the each of the speakers and the listener.
Equalizer
● SOUND MODE: Switch this function ON to select a desired sound mode.
● BASS BOOST: Switch this function ON to boost the bass sound.
● SUPER BASS: Switch this function ON to create the super bass sound
effect.
● TREBLE BOOST: Switch this function ON to boost the bass sound.
3D processing
i
This function is only available when the DOWNMIX function is set
to 5,1CH.
PRO LOGIC II
This function is used to convert 2-channel audio signal into 5.1-channel
audio signal.
● PRO LOGIC II: When switched ON, this function is always active.