11
ACVDS950
● Insert the SD/MMC device in the slot (16). The device can only be
connected one way.
● Select the MEDIA mode, then select the CARD option.
● To start playback, press the PLAY button (27) once.
● For extended instructions, read the paragraph "SD/MMC functions" further
on in this manual.
DVD/CD functions
5.4
After the disc has been loaded, a content menu will display on the TV screen.
● Press the arrow buttons (24/25/38/39) to select a menu item.
● Press the ENTER button (40) to enter the selected menu item.
During playback, the following functions are available:
● To select a chapter (DVD) or track (CD), press the digit buttons (29).
● To select the next or previous chapter (DVD) or track (CD), press the
PREV button (24) or the NEXT button (38).
● To forward or rewind the DVD, press the FWD button (39) or the
REV button (25). The available speed rates are: 2x, 4x, 8x, 16x, 32x.
● To pause playback, press the PAUSE button (28) once; to resume
playback, press the PLAY button (27).
● To stop playback temporarily, press the STOP button (36) once. Press the
button again to stop playback permanently, or press the PLAY button (27)
to resume playback.
● To repeat a chapter (DVD) or one or all tracks (CD):
Press the REPEAT button (22) once to repeat the current chapter or track.
•
Press the button once again to repeat the current title.
•
Press the button once again to repeat all chapters or tracks.
•
Press the button once again to cancel the function.
•
● To play the DVD frame by frame, press the STEP button (37).
Press the PLAY button (27) to resume normal playback.
● To view a specific title of a DVD, press the TITLE button (23).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (43)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (26).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the OSD button (34).
