A~Z and 0~9. Finally press SEL button to play the selected file.
3) In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is
not the root folder, it will find a root folder named ROOT). Then press the VOL+
or VOL- button to select your desired folder and then press >> | or |<< button
to select your desired track in the folder. Finally press SEL button to play the
selected track.
20.AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly , AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all
the time. The interval of checking time of each AFs depends on the signal strength of
current station, from a few minute for strong station to a few seconds for weak station.
Every time that new AF is stronger than current station, it switches over to that
frequency for very short time, and NEW FREQUENCY is displayed for 1-2 second.
Because the mute time of AF switching or checking time is very short, it is almost
inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only
receive and save RDS program.
21. CLOCK BUTTON
Press the CLK button briefly to display time for 5 seconds on the display, and then
returns to its previous display unless the button is pressed again.
Then press the CLK button and hold for more than 1 seconds until the real time
flashes on the display. Then you can adjust HOUR or MINUTE by press the VOL- or
VOL+ button .
22. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
23. MMC/SD CARD SLOT
In order to play the file in the MMC/SD card, insert the MMC/SD card into the
MMC/SD card slot. The system will change into the MMC/SD mode automatically,
and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB stick are both inserted into their slot or socket, the
system will change into the playback mode of the latter one.
24. USB SOCKET
In order to play the file in the USB stick, turn over the plastic cover cap then insert
the USB stick into the USB socket. The system will change into the USB mode
automatically, and then play the first file in the USB.
When no needing to do USB operation, please cover the plastic cover cap.
25. FLASHING LED
When the front control panel is removed this indicator flashes.
Page 5
Page 6
26. RESET BUTTON
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock setting
and some stored contents.
