7
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the product from the box.
2. Remove any packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the parts
and the contents against the parts list.
4. Your appliance is now ready for
normal use.
INSTALLING THE BATTERIES
The Bluetooth Alarm Clock radio requires 2
AAA batteries (not supplied) to operate. The
batteries can be used as a backup power
source if the electricity is down.
Note:
The batteries can save your settings
if the alarm clock is used in different
locations.
1. Lay the clock face down on a sturdy
surface that will not scratch the
display.
2. On the back of the clock, open the
battery compartment by gently
pushing the tab on the compartment
door in the direction indicated on the
bottom of the clock.
3. Insert 2 AAA batteries (not included)
following the +/- polarity as indicated
in the compartment.
4. Re-attach the battery door and ensure
it properly clicks in place.
Note:
To avoid damage, do not force the
battery door open.
5. Adjust the position of the alarm clock
so that is stands right side up.
CONNECTING THE POWER SUPPLY
To use the power adaptor, connect the
AC power cord to the clock’s AC power
jack, and plug the other end into the mains
outlet.
SETTING THE TIME
Before setting the time, make sure all of
the non-clock functions such as Bluetooth,
FM and AM Radio are turned off. Press and
hold the Function button to turn off any
non-clock setting.
1. Press and hold the Clock/Memory
button until the time flashes on the
LED display.
2. Press the Prev/Hour button repeatedly
until the correct hour appears on the
screen.
Note:
The time displayed on the clock is
only in 24 hour format.
3. Press the Next/Minute button
repeatedly until the correct minute is
displayed on the screen.
SETTING THE ALARM
Note:
The alarm clock comes with two
separate alarms.
Before setting the alarm, make sure the
correct time is shown on the LED display.
Ensure that all of the non-clock functions
are turned off. Press and hold the Function
button to turn off any non-clock setting.
1. Press and hold the Clock/Memory
button until both the time on the LED
display and Alarm 1 Buzzer Light
begin to flash.
2. Press the Prev/Hour button repeatedly
until the correct hour appears on the
display.
Note:
The time displayed on the clock is
only in 24 hour format.
