6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the parts from the packaging.
2. Assemble as instructed in the
assembly page.
3. Your appliance is now ready for normal
use.
4. Dispose of the packaging in a
responsible manner.
HOW TO POSITION THE TURNTABLE
Ensure that the product is placed on a
flat level surface in a dust free, cool, dry
environment with good ventilation and
where it cannot be knocked or bumped and
the power cable will not cause a trip hazard.
MAINS CONNECTION
1. Ensure that the mains voltage of your
home corresponds to the operating
voltage of the adaptor.
2. Connect the DC connector to the DC
Power jack on the unit.
3. Plug in the power adaptor to the mains
socket.
AMPLIFIER CONNECTION (IF REQUIRED)
Whilst you can listen to your new turntable
using the built in speakers you may wish to
connect it to your turntable.
Connect the audio plugs to the line input on
your mixer or amplifier using an RCA cable
(not supplied).
•
Red plug into r/h channel input.
•
White plug into l/h channel input.
Note:
The turntable is equipped with its own
speakers for music playback.
HEADPHONE JACK OUT
•
To listen to music via headphones,
decrease the volume to a low level by
rotating the Volume Dial in an anti-
clockwise direction.
•
Insert one end of the headphones into
the headphone jack and the other end
into your ear.
PLAYING A RECORD
1. Lift up the lid and make sure to secure
the arm support.
2. Rotate the On/Off Volume Dial
(clockwise) to turn on the turntable.
3. Press the Mode button to select
Turntable mode.
4. Remove the protective cover from the
stylus cartridge by gently sliding it
away from the tone arm.
5. Place the record of your choice on the
turntable. If you are using a 45 RPM
record where the centre hole has been
removed; DO NOT forget to place the
adaptor on the record spindle first
before you begin playback. Note: Not
all 45RPM records will require the
adaptor.
6. Choose the desired playing speed using
the Speed Selection Switch between
33, 45 and 78 RPM.
7. Unlock the tone arm from the arm lock
by pushing it aside.
8. Raise the tone arm using the arm
raising lever or by carefully lifting it.
