Akai 32-126J-GB-5B-HCU-UK User Manual Download Page 25

27

Note:

 Supplier may change the Software and On Screen Graphics without warning.

General Information

General

I would like to have louder 
sound by connecting 
additional speakers

Subject to the TV model and connections, it is possible to connect the TV 
to an external amplifi er or surround sound (subject to connections/inputs 
on the device) as follows:-
1) Connect a COAX cable* from the TV’s COAX output to your amplifi er/
surround systems COAX input
2) Connect a 3.5mm jack to L/R phono cable* from the TV’s headphone 
socket (where fi tted) to your amplifi er/surround sound L/R input. Please 
note sound to the TV’s speakers will be disabled.  
3) On selected models, it maybe possible to connect a SCART input/
output* switch with an additional L/R Phono cable* to the TV’s SCART 
socket and to the L/R Phono Input of your amplifi er/surround sound. 
Please note due to copyright laws it is not possible to output video/sound 
from the TV on certain sources, i.e. HDMi, DVD etc. 
*cables and switches mentioned are available to purchase separately from 
your retailer.

General

Why are some options in 
the menu unavailable and 
greyed out

Some options are only available in certain sources, i.e. HDMI, PC/VGA. 
They are unavailable in the other sources where they have no affect.

General

Can I stop my TV turning off 
after 4hrs? 

Yes
1) In the picture settings menu, de-select Eco-home
2) In the time settings menu, scroll down to Auto standby and select OFF

TV

I have tuned in Digital TV 
but I am not  receiving any 
or all of the channels and/
or the channels I receive are 
breaking up

1) Check you are in an area that can receive Freeview. 
Visit www.freeview.co.uk.
2) Check you are using an aerial that is able to receive a good digital 
signal. In most cases, you will need an outdoor digital hi-gain/wideband 
aerial. In areas that have excellent Freeview coverage, you may be able 
to use a loft type aerial but it is highly likely that you will also need to 
connect a booster between the back of the TV and the TV aerial wall 
socket. Unfortunately, to receive a good enough digital signal, it is not 
possible to use a portable/indoor type aerial. This may change once the 
analogue signal is switched off in 2012 and the Digital signal strength is 
increased.

TV

I have re-tuned my television 
but when I switch it off it is 
not storing the channels

Complete a fi rst time installation, please refer to the set-up menu section 
of the manual for how to do this

VCR/DVD
Recorder

I have connected the TV to 
my VCR or DVD Recorder via 
SCART but it is not recording

In addition to connecting via SCART, you should connect the aerial cable 
from the wall socket to your VCR/DVD Recorder and another aerial cable 
from the VCR/DVD Recorder to the TV

Game Consoles

I have connected my PS3 to 
the TV via HDMI, but I am 
not receiving any pictures or 
sound on my Television

1) Ensure the TVs source is on HDMI
2) Check your settings on your PS3 are as per the PS3 instruction manual

Game Consoles

I have connected my 
Xbox 360 to the TV via 
Component Cables (Red, 
Green & Blue) but I am not 
receiving any sound

Component cables only provide HD Pictures. For the sound you will need 
to connect the Red & White audio cables on the Xbox to the Red & White 
phono inputs on the rear of the TV. Please refer to the ‘Connections’ 
pages.

USB Mode

I have inserted a USB 
Memory Key, but the TV 
does not recognise it

Ensure the USB Memory Key is formatted to type FAT32.

USB Mode

Can I use a USB portable 
hard drive with my TV?

If you wish to use a portable hard drive larger than 32GB, please note 
that it must be formatted to the FAT32 fi le system in order to operate on 
this TV. Windows XP/Vista computers are only capable of formatting up 
to 32GB, therefore, you will need a software programme/utility to format 
larger hard drives. Please refer to the web site for more information.

System Lock

I have changed the password 
on the television and now 
forgotten it

There is a master password of 4711, to gain access to the TV menu and 
reset the normal password

FREQUENTLY ASKED QUESTIONS

User Guide - 32-126J-GB-5B-HCU-UK, 40-126J-GB-5B-FHCU-UK.indd   Sec1:27

User Guide - 32-126J-GB-5B-HCU-UK, 40-126J-GB-5B-FHCU-UK.indd   Sec1:27

5/15/2013   3:22:06 PM

5/15/2013   3:22:06 PM

Summary of Contents for 32-126J-GB-5B-HCU-UK





























Reviews: