AKA Signum MFT 7272?, Instruction Manual

Page: 22 / 34

22 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru aka_md@mail.ru
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации.
these lower tones appropriately. If you perform a search in places where the medium/large
iron can be interesting (Arrowheads, knives, medieval items etc.) you can move the non-
ferrous tone to the sector border where the majority of large iron indicates at -45 (-50
possible maximum).
Volume WS [Volume of weak signals 1-9] A djusting this parameter
allows you to change the volume of the ST from weak signals from small or deep
targets. Smaller values of this parameter can control the level of the volume signal for a
wider range of target depths. However, at very low settings signals from small or
extremely deep objects can be too quiet. Very high settings will reduce the differential
volume level between deep and shallow targets. Therefore, the value of this parameter
is selected experimentally, to individual user preferences.
Volume LT [1..9]. Parameter adjusts the volume of targets within the setting of
the LT border (iron). Sometimes it is useful to reduce the volume or even mute the sound
from iron in order to make the search more comfortable. This parameter value is selected
based on the personal preference of the user. The value of Fe-9 Volume adjusts the
volume levels of iron and non-ferrous objects.
In the case of overloading the electronic circuit due to large or shallow targets
under the coil the device will issue an audible and visual alarm overload.
ADDITIONAL MENU (ADD. Menu)
The menu is in addition to the main options menu, this sub-menu extends the
capabilities of the sound and the display options as well as an option to adjust the auto-
tuning of the balance to the soil.
To enter the sub-menu, press and hold down
Navigate the sub menu
options by using the buttons and Selecting a menu item and enter the
submenu by pressing the button Navigate the parameters of the selected sub-menu
by the buttons and to select an option use the button. To change the
values in the selected parameter use buttons and To exit the sub menu
press.
MENU OPTIONS:
1.
Tones Settings RT (Border 2, Border 3, Border 4, Freq. RT);
2.
Tones settings ST (Frequency LT, Freq. 2, Freq. 3, Freq. 4, Freq. 5);