AJAX Segma, User Manual

Page: 17 / 42

17
Search Coil Assembly
1- Align the clamp with the holes on the pole .
2- Insert the screws into the clamp .
3- Put the Main Unit inside the clamp .
4- Put the nuts on the screws and tighten them .
5- Unlatch the pole lock .
6- Insert the second pole and adjust the length .
7- Lock the latch back in securely .
8- Align the Search Coil with the second pole tip .
9- Insert the screw .
10- Adjust the Search Coil angle and tighten the nut .
11- Inset the connection module in front of the main unit .
12- Wrap the cable around the second pole
13- Insert the connector into the connection module in the front of the Main Unit and
tighten it .
Assembly