To set a personal code in the Ajax app
Each user sets a personal code individually. The admin cannot set a code for all users.
To set up an access code for a person who is not registered in the system
If you want to set up a duress code, change settings for access to groups, Night
Mmode, code ID, temporarily disable or delete this code, select it in the list and
make changes.
PRO or a user with admin rights can set up an access code or change its settings. This
function is supported by hubs with OS Malevich 2.13.1 and higher. Access codes are not
supported by the Hub control panel.
Adding passes and tags
KeyPad Plus can work with
, and third-party cards and
key fobs that use DESFire® technology.
Before adding third-party devices that support DESFire®, make sure they have enough
free memory to handle the new keypad. Preferably, the third-party device should be pre-
formatted.
3.
Set the keypad duress code you want.
1.
Go to the user pro le settings (
Hub
→
Settings
→
Users
→
Your pro le
settings
).
2.
Select
Passcode Settings
(User ID is also visible in this menu).
3.
Set
User Code
and
Duress Code
.
1.
Go to the hub settings (
Hub
→
Settings
).
2.
Select
Keypad Access Codes
.
3.
Set up
Username
and
Access Code
.
