surface and fall, which may lead to failure. Please note that if the device is attached
with adhesive tape, the tamper will not trigger when trying to detach it.
2. Conduct the volume level test. If KeyPad Combi is hardly audible, relocate the
device or change the volume level in the device settings.
3. Make sure it is convenient to enter passwords or use Tag/Pass. Relocate
KeyPad Combi if it is inconvenient to manage the security at the selected
location.
4. Remove the device from the SmartBracket mounting plate.
5. Attach the SmartBracket mounting plate to the surface using the bundled
screws. When attaching, use at least two fixing points. Be sure to fix the
perforated corner on the SmartBracket plate so that the tamper responds to a
detachment attempt.
6. Slide KeyPad Combi onto the mounting plate and tighten the mounting screw
at the bottom of the body. The screw is needed for more reliable fastening and
protection of KeyPad Combi from quick dismantling.
7. As soon as the device is fixed on SmartBracket, it shall blink once with
LED
X
(Malfunction) — this is a signal that the tamper has been triggered. If the
LED does not blink after installation on SmartBracket, check the tamper status
in the Ajax app and make sure the plate is firmly attached.
Summary of Contents for KeyPad Combi
Page 38: ......
