26.03.2022 13.55
CombiProtect User Manual | Ajax Systems Support
Side 10 af 21
https://support.ajax.systems/en/manuals/combiprotect/
?
_ga=2.171224166.754703337.1648293156-504169808.1647685641
Motion Detector Always Active
If active, the detector always registers
motion
Glass Detector Enabled
If active, glass breaking detector will be
active
Glass Protection Sensitivity
Choosing the sensitivity level of the
glass detector:
Glass Protection Always Active
If active, the detector always registers
glass breaking
Alert with a siren if motion detected
added to the
system
are activated when the motion
detected
Alert with a siren if glass break detected
added to the
system
are activated when the glass
break detected
Jeweller Signal Strength Test
Switches the detector to the signal
strength test mode
Detection Zone Test
Switches the detector to the detection
area test
Attenuation Test
Switches the detector to the signal fade
test mode (available in detectors with
Lrmware version 3.50 and later
)
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
High
Normal
Low
