Jeweller Signal Strength Test
mode
Detection Zone Test
Switches the detector to the detection area test
Attenuation Test
Switches the detector to the signal fade test
mode (available in detectors with
fi
rmware
version 3.50 and later
)
Temporary Deactivation
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
The system can also automatically deactivate
devices when the set number of alarms is
exceeded or when the recovery timer expires.
User Guide
Opens the detector User Guide
Unpair Device
Disconnects the detector from the hub and
deletes its settings
Event
Indication
Note
Entirely
— the device will not execute system
commands or participate in automation
scenarios, and the system will ignore device
alarms and other noti
fi
cations
Lid only
— the system will ignore only
noti
fi
cations about the triggering of the
device tamper button
