5
Introduction
1
1.3 Installer Supplied Components
Your PC should have the following
minimum specifications:
A. Pentium 400MHZ or better
B. 128MB Hard Drive or better (provided)
C. 128MB Memory or better
D. Linux Operating Software (provided)
E. 1 open PCI slot
Electrical Enclosure
24" x 36" x 12" minimum recommended
1.2 AJAX Components
Qty.
Part No.
Description
1
10464
CPU10 motion control card
1
10250
Encoder/Jog Panel Bracket
w/ribbon cables
1
10483
DC3IO Servo Drive
6
10234
5’ fiber optic cables
1
10274
Jog Pendant
1
10237
Intermediate Jog Pendant Cable
1
--
Ajax CNC CD-containing manuals
1
--
Linux Source CD
1.4 Optional Installer or AJAX supplied
components
Axis motors
a) 17in-lb, 29in-lb, and 40in-lb DC brush motors with encoders
are available from AjaxCNC.com.
b) Pre-wired motor cables are available from AjaxCNC.com.
DC Power Supply consisting of the
following:
a) Primary transformer with secondary 83VAC output
provides 120VDC after rectification.
b) Capacitor, 12,000uf minimum, 160VDC
c) Fuse Holders & 15A fuses
Misc. Electrical components
Suggested Source
a) Rotary electrical disconnect
AjaxCNC.com
b) Fuse Holders
AjaxCNC.com
c) Quencharc
AjaxCNC.com
d) Terminal strips
AjaxCNC.com
e) E-Stop contactor, E stop switch
AjaxCNC.com
f) Spindle inverter
Automationdirect.com
g) E-Stop contactor
AjaxCNC.com
h Coolant contactors
AjaxCNC.com
i) Spindle reversing contactors
AjaxCNC.com
j) Limit Switches, normally closed type
Automationdirect.com
Revisions on 03/01/05
\Manuals\AJAX.pmd