
OG-UDC 3G-SDI Up, Down, Cross-Converter v1.0 12 www.aja.com
DIP Switches
The OG-UDC has two DIP switch modules mounted on the card. The left General
DIP switch module can be used for general card configuration, and to enable
remote configuration using DashBoard. The right Reference DIP switch is used for
configuring the card's reference (see
Figure 3 on page 6
).
The General DIP switch #1 is a “Local/Remote” switch. When in “Local” mode, the
remaining DIP switches support a subset of the user controls, and DashBoard
displays only the Card and Status tabs and cannot be used for configuration.
For more details, refer to
"Using DIP Switches to Control the OG-UDC" on page 16
.
DashBoard Control System
The DashBoard Control System, created by Ross Video, provides a control
interface between Windows, macOS and Linux computers and the cards installed
in an openGear frame. DashBoard operates through TCP/IP communication
and requires an Ethernet connection between the controlling computer and an
openGear frame.
For details about acquiring and using the DashBoard Control System, refer to
"Using the DashBoard Control System" on page 18.
Installation
Summary
Installing an OG-UDC card into a OG3 openGear frame consists of the following
steps:
• Install the Rear Panel onto the back of the frame corresponding to the slot pair
you will be using for the OG-UDC card.
• Insert the OG-UDC card into the frame in the right (even numbered) slot of the
pair.
• Connect the BNC, HDMI and audio cabling to the Rear Panel.
ESD Susceptibility - Static discharge can cause serious damage to sensitive
semiconductor devices. Avoid handling circuit boards in high static
environments such as carpeted areas, and when wearing synthetic fiber clothing.
Always exercise proper grounding precautions when working on circuit boards
and related equipment.
Unpacking
Unpack each openGear product you received from the shipping container and
ensure that all items are included. If any items are missing or damaged, contact
your sales representative or AJA directly.
Parts List
Quantity
Description
1
OG-UDC Front Card in ESD bag
1
BNC Rear Card
2
WECO mating connectors, part number
107654-00