OG-HA5-4K HDMI to SDI Converter v1.0 11 www.aja.com
3. Hold the card by the edges and carefully align the card edges with the rails
inside the frame. The slots are numbered starting from the left-most slot
when facing the frame front.
IMPORTANT: OG-HA5-4K cards are installed into the right (even numbered) slot of the
pair in order to connect with the rear panel.
4. Fully insert the card into the frame until the card is properly seated in the
Rear Card. There are two stages to inserting the card:
A. After you feel the card's first click, its position in the frame will resemble the
photograph below in
B. Next, press against the white plastic tab again until you feel the second
click. The card's position will resemble the photograph below in
NOTE: Some cards require more pressure than others to be fully inserted. Make sure that
the plastic tab at the bottom of the front edge of the card is completely upright. If
it is tilting forward, the card is not yet fully inserted.
Figure 8. The card is not yet fully inserted, as indicated by the white plastic tab
tilting forward.
Figure 9. The white plastic tab is upright, indicating that the card is now fully
inserted.
