KONA Capture, Display, Convert v15.2 35 www.aja.com
Format Screen
Figure 27. Format Screen, KONA 5
The Format Screen shows the video format currently in use by the KONA
framebuffer (called the Primary Format) and allows you to change it.
The KONA 4 Format Screen in UFC mode also displays a Secondary Format for
hardware conversion (not available on KONA 5 or KONA 1 or KONA 4 in 4K Mode).
See
"Secondary (Converted) Format" on page 36
for more information
Primary (Frame Buffer) Format
This pull-down menu shows the currently selected format. If you select an
alternate value in the Primary Format using the pull-down, it will change the
format used by KONA’s framebuffer.
When a change is made via the Video Format pull-down or by clicking an icon
and selecting a new format via a contextual menu, the block diagram will change
to reflect the new format.
Pixel Format
Use this pulldown menu to choose: YUV-10, YUV-8, RGB-10, or ARGB-8 or RGB-12.
RGB Range
The RGB Range pulldown menu allows you to select either Full-range (0-1023) or
SMPTE range (typically 64-940) for RGB color output.
