manualshive.com logo in svg

AJA Ki Pro GO, Installation And Operation Manual, Page: 20 / 65

Share
Download
AJA Ki Pro GO Installation And Operation Manual Download Page 20

Ki Pro GO File Based Recorder/Player v1.0 20 www.aja.com

 

LAN Connection

A LAN is a shared network that includes other Ethernet devices all attached via 

a hub or switch. Multiple computers on the network will then be able to control 

that Ki Pro GO by entering its IP address into each computer's web browser (

Figure 

9

). 

Figure 9.  Ki Pro GO LAN Connection Example using a LAN

10/100/1000 Base-T 

Ethernet Switch

Workstation

Computer 

DNS Server

Laptop

Computer 

Ki Pro GO 

Ethernet LAN Cables 

Ethernet LAN Cable 

HDMI Monitor

TCP/IP Information You May Need

LANs may be divided into zones, and devices on a LAN may have dynamically 

assigned (DHCP) IP addresses, or fixed (static) IP addresses. Before connecting 

Ki Pro GO to the LAN, talk to your network administrators to find out how they 

want it connected (DHCP or Static IP). If your LAN requires static IP addresses, also 

ask your IT administrator for the Subnet Mask and Default Gateway IP addresses 

(your LAN’s Internet router).

LAN DHCP Configuration Procedure

1.  Connect Ki Pro GO to a LAN hub or switch operating as part of a DHCP 

network, using a CAT Ethernet cable.

2.  Connect a DHCP configured computer to the network using a CAT Ethernet 

cable.

3.  Press the Ki Pro GO front panel 

CONFIG 

button to show the Configuration 

menus on its front panel display.

4.  Go to the 

9.0 IP Address Type

 menu and ensure that 

DHCP

 is selected in 

the Ki Pro GO's 9.0 IP Address Type menu.

5.  Go to the Ki Pro GO 

9.1 IP Address

 menu, note the IP address displayed, 

and enter that IP address into your computer's web browser.

6.  The Ki Pro GO webpage will be displayed on your network connected 

computer's web browser, allowing complete control of the unit.

LAN Static IP Connection Procedure

This procedure assumes you will be using a computer that is already configured 

for use on the LAN.
1.  Ask your network system administrator for the IP information the Ki Pro GO 

is required to use on that network.

2.  Press the Ki Pro GO front panel 

CONFIG 

button to show the Configuration 

menus on the front panel display.

3.   Ki Pro GO 

9.0 IP Address Type

 menu and select 

Static Addr

.

Summary of Contents for Ki Pro GO


































































Reviews:

No comments