Io IP Transport, Capture, Display v16.2r1 29 www.aja.com
Format Screen
The Format Screen shows the video format currently in use by the Io IP
framebuffer (called the Primary Format) and allows you to change it. All
throughout the Control Panel, choices are always presented based on what Io IP
can do with the signals available and the inputs/outputs selected.
AJA Device Format
Video Format
This pull-down menu shows the currently selected Device format. If you select
an alternate value using the pull-down, it will change the format used by Io IP’s
framebuffer.
When a change is made via the Video Format pull-down or by clicking an icon
and selecting a new format via a contextual menu, the block diagram will change
to reflect the new format.
Pixel Format
Use this pulldown menu to choose: YUV-10, YUV-8, RGB-10, or ARGB-8 or RGB-12.
RGB Range
The RGB Range pulldown menu allows you to select either Auto, Full-range (0-
1023) or SMPTE range (typically 64-940) for RGB color output.
Follow Input
Enabling the Follow Input checkbox allows the Control Panel Buffer to auto-
switch to whatever is the detected input format. This feature works only if the
controlling application supports input-based capture—AJA Control Room for
example.
