FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 91 www.aja.com
1 Freeze Output
This parameter tells the FS-HDR to freeze the current video frame on the Video
Processor output. This may be useful either for testing or in case of loss of the
input source.
Off (default)
Normal video is output (no freeze).
On
The FS-HDR captures and freezes the most current video frame and
displays it on the outputs as long as this parameter is set to On.
NOTE: Normal output can be a version of its currently selected input, a Sidebar
or Letterbox display, Black, or a Test Pattern, depending on the current
configuration.
Audio Select Buttons EMBED, AES
IMPORTANT: These parameters are NOT affected by the selection of Single or Four
Channel Mode.
As described in
"Operational Summary" on page 18
the EMBED and AES front
panel buttons select categories of audio.
• EMBED selects SDI embedded audio for control. The FS-HDR supports 16
embedded audio channels for each video channel.
• AES selects both AES and MADI audio for control, each with their own set of
parameter menus. The FS-HDR supports up to 16 AES channels (eight pairs),
and up to 64 MADI audio channels.
When the EMBED or AES button is selected, the three Audio buttons on the right
are used to select a category of parameter menus.
Figure 34. Audio Menu Group Buttons
LEVEL
DELAY
MAP
LEVEL Menu Group
IMPORTANT: The settings in this menu group apply to the currently selected audio
category (EMBED or AES/MADI). These settings are shared with both Four
Channel and Single Channel modes.
The LEVEL menus provide Level and Phase adjustments for SDI Embedded, AES,
MADI BNC, and MADI Fiber input audio.
EMBED Level Menus
When EMBED is selected, the following SDI Embedded Audio menus are available.
