manualshive.com logo in svg

AJA BRIDGE LIVE, Installation And Operation Manual

Share
Download
AJA BRIDGE LIVE Installation And Operation Manual Download Page 108

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 108 www.aja.com

 

Chapter 9 – Advanced System Administration

Advanced BRIDGE LIVE Configuration

You can change configuration settings (used for fine-tuning to a particular use 

case) and change the version of BRIDGE LIVE. You can access both configuration 

settings by hovering with mouse over the Setup icon in the UI, as you can see in 

Figure 168

. 

Figure 168.  Setup Mouse-over

Advanced Setup

Access Advanced setup by clicking the Advanced setup option under the Setup 

mouse-over. You can select between saved configuration under Available 

settings drop-down menu, download them, upload new ones and delete custom 

configuration files. Click the Apply button in order to set the chosen settings 

configuration. After that, you will be prompted to restart the BRIDGE LIVE service 

in order to apply changes. This configuration allows you to edit parameters, 

which adjust the transcoding process, such as GPU memory distribution, 

encoding presets, and other settings.
The suffix “preset” means that the file is the pre-configured one, which in general 

should work best with a particular use case. The suffix “custom” points out the 

fact that this settings file was uploaded to BRIDGE LIVE by the end user.
It is advised to consult the configuration adjustments with your support team.

Summary of Contents for BRIDGE LIVE












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands