3G-AM Mini-Converter v1.0
www.aja.com
15
Figure 6. MiniConfig Screen
NOTE:
The LED adjacent to the SDI connectors indicates by color the detected signal type. Off is no
signal, Green is SD-SDI, red is HD-SDI, and amber/orange is 3G-SDI.
Selecting a Mini-Converter with the dropdown menu causes this application to connect
to the selected converter. The graphic of Mini-Converter and text below it provides:
• Type of converter
• Firmware version
• Serial number of the unit
A status field at the bottom of the screen shows if your application is connected and
communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the current
settings and change any values. Making a change communicates that new value to the
Mini-Converter’s non-volatile memory.
Tabbed Screens
The Tabs delineate control screens with groups of controls for each type of task to be
performed. The controls for the actual configuration parameters are specific to each
Mini-Converter type. Click on any of the tab buttons and the screen below will change to
match. Each of these screens are described on the following pages.
Tabbed
screens
Message
showing
status
Firmware
version and
serial
number
Each connector is labeled with the
signals currently detected:
Select a USB
port and an
attached
Mini-Converter
(name in
parentheses)
