12G-AM Mini-Converter v1.0 7
www.aja.com
The exact functions of the DIP switches are described in
Mini-Config Control
The Mini-Config application can also be used to configure the unit’s audio
embedding and disembedding functions. Configuration set via Mini-Config is
stored in the unit through subsequent power cycles.
Installing and using Mini-Config are described in
Installation
Typically, 12G-AM installation consists of the following steps:
1. Ensure the converter is disconnected from power.
2. Connect video equipment to the converter BNCs.
3. If applicable, connect fiber to the 12G-SDI Fiber single channel SFP receiver,
transmitter or transceiver.
CLASS 1
LASER
PRODUCT
Warning! Active fiber-optic cables emit radiation invisible to the human eye. Do
not look directly at the end of an active fiber-optic cable or the fiber connector
on a
12G-AM-R, 12G-AM-R-ST, 12G-AM-T, 12G-AM-T-ST, or 12G-AM-TR
; these
models are Class 1 Laser Products.
Figure 2. 12G-AM to Fiber LC Single Channel SFP Example
NOTE: Fiber optic interconnections can be severely compromised by dirt, oils, or other
contaminants. All dust caps should be replaced on cables and equipment
whenever
12G-AM
converters are disconnected from fiber optic cables.
4. Connect the breakout audio cable to the converter.
5. Connect audio equipment to the breakout cable.
6. Apply power to the converter (AJA power supply included).
