10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.1 13 www.aja.com
NOTE: DHCP is enabled by default, and if the device is connected to a DHCP server the IP
address field will populate.
6. Enter the IP address into a browser window. The web UI for your AJA device
will display.
7. Use the web UI to fully configure and control your AJA Device.
Settings Retained
The current 10 GigE IP Mini-Converter's configuration settings are retained even
when powered off, so subsequent installations for an identical decoding or
encoding session can be done with the following simple steps:
1. Apply power to the 10 GigE IP Mini-Converter.
2. Connect the unit to your network using the Control LAN, Media LAN 1 and
Media LAN 2 and connect the unit’s inputs and outputs.
NOTE: Three LAN connections to the unit are not necessarily required on an ongoing
basis. If it is desirable for your installation, after the 10 GigE IP Mini-Converter
is set up, you can access all control parameters through one of the Media LANs
with the appropriate network configuration. See
Only the Media LAN Port for Control and Media Settings" on page 23
for more
information.
NOTE: The 10 GigE IP Mini-Converters pack an unprecedented feature set into the mini
converter box. As a result, the unit uses approximately 13 watts of power. It will be
very warm to the touch, which is normal. The unit is engineered to operate across
the full temperature range, from 0 to 40 degrees C.
NOTE: For highest reliability, the mini converters rely on convection cooling instead
of using a built-in fan. Therefore, when installing the units, mount in a
location where they have access to air for proper cooling. Do not stack the
10 GigE IP Mini-Converters with other mini converters or other powered
equipment.
REST API Documentation
AJA’s REST automation API provides a platform from which you can issue
commands to an AJA device’s internal web server, allowing remote systems
the ability to control AJA embedded or networked devices. With this control
framework, you can build integration and automation scripts, using any scripting
language, allowing you to take full advantage of the device’s functionality.
This documentation is available at the following link:
