HELO Plus H.264 Streaming and Recording Encoder v1.0 68 www.aja.com
Chapter 6 – eMini-Setup
Overview
NOTE: You must use eMini-Setup v2.3 or higher with HELO Plus to ensure full
compatibility.
AJA's eMini-Setup is an easy way to set up your AJA device's network settings for
AJA products that lack a front panel display, which prevents easy observation of
the device's current IP address.
The eMini-Setup application, available as a free download from the AJA website,
lets you identify an AJA device's IP address and, if necessary, configure its network
settings so the unit can operate in your work environment.
NOTE: The eMini-Setup application is only used to setup selected Ethernet capable AJA
devices. This application is not used to operate those devices.
Once configured, your AJA device can be accessed via an Ethernet network using
a web browser, and can then be reconfigured over that network, using the AJA
device's IP address and built in web server.
Acquiring eMini-Setup
AJA’s eMini-Setup application is available for download from the AJA website:
https://www.aja.com/family/software#eminisetup
Click the
Download
button for the OS (macOS or Windows) you will use with
eMini Setup.
Installing eMini-Setup
PC Installation
To install eMini-Setup on a Windows PC:
1. Download the application from the AJA website. See
2. Open the AJA_eMini-Setup_win.zip file.
3. Double-click on the AJA_eMini-Setup.msi file.
4. The Setup Wizard will guide you through the installation.
