2
Assembly instructions
After opening the package, please check if the parts in Fig. A are all included
firstly. Totally 6 pcs (2 x No. 16 ).
Fig. A
Fig. 1
Fig. 2
Fig. 3-2
5#: Base
58#: Post
16#: Support
33#: Boom
N#: Spare parts carton
Installation steps
Step 1
Fig.1
Open spare parts carton N#, take
out 4# (Front wheel), loose 1#(Nut),
then fasten 4# (Front wheel) into
5# (Base) holes, put 2# (Washer)
above the hole, tighten 1# (Nut)
Step 2
Fig.2
Take out 6A# (Steering wheel) from spare parts carton N#, loose 15# (Screw),
14# (Spring Washer), 13# (Washer), align 6A# (Steering wheel) and 5# (Base)
hole, assemble 13# (Washer), 14# (Spring Washer), 15# (Screw) according to
Fig. 2 in order, finally tighten 15# (Screw).
Step 3
Fig. 3-2
Take out 9# (Nut),10# (Spring Washer), 11# (Washer), 12# (Screw M12X85) from
spare parts carton N#. Connect 58# (Post) and 5# (Base), with 12# (Screw),
11# (Washer), 10# (Spring Washer) and 9# (Nut).
Don’t twist 12# (Screw) too tightly.
(Note: During this step, please make sure all parts of 58# post are stable
to avoid any accident and injury)
