AJ 202799, User Manual

Page: 206 / 217

7
5 Power connection
When carrying out the electrical installation, it is important to comply with all applicable national and regional
regulations, as well as the provisions of the responsible electrical supply company. The cabinet can only
be connected to an electrical network with a current protector and a circuit breaker. If the network does not
have these protective elements, a portable surge protector must be used!
Before installation, check that the charging box is not damaged.
If there is any doubt that the supply cable is damaged, the cabinet must not be connected to the
network.
Open the left door of the cabinet and remove the supply cable to the power adapter (Fig. 1).
Fig. 1
Pull out the feed cable grommet on the left side of the cabinet (Fig. 2).
Fig. 2