background image

Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so 

 

 

 

 

WARNING

approved fuel

• THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product shall be used outdoors, in a

ventilated space and shall not be used in any enclosed area.

• This unit is to be used with propane gas only! (sold separately)

• Do not attach a remote gas supply to this unit.

• Only use propane gas for this unit.

S

olid fuels shall not be burned in this appliance.

• LP GAS WARNING: Do not use any more than 1/4 in depth lava rocks/pumice stones/Lava  Glass

above the bur

• If the propane gas tank is leaking gas, you may hear, see, or smell a hiss. Do the following:

e department for help. 

• Applying too much propane may result in gas pooling and will not burn. Allow fresh air into the unit

so that the remaining gas may escape.

• Discontinue use if any part of the propane tank is damaged. Rust and dents may be hazar dous and

should be inspected by a gas supplier.

rocks/pumice stones/LavaGlass

 

could pop out and cause injury. Should any rocks pop out, discard   

them.

• Always ensure that lava rocks/pumice stones/LavaGlass are completely dry before use. Failure to

do so will cause them to crack or pop.

• Do not operate unit until all parts are fully assembled.

• Do not paint or color any part of this heating unit.

• Unit may be hot while in use, do not attempt to move it while in use.

• Never leave this heating unit unattended while in use.

• This unit is not intended for cooking.

• Keep a safe distance to avoid burning skin or clothing.

• Do not sit or rest hands or feet on this heating unit.

• Keep all electrical cords and fuel supply hose away from heated surfaces.

Manifold pressure: 11 inch w.c. (2.74 kPa).

Use LP propane tanks with the following dimensions: diameter 12 in, height 18 in - capacity 20 lbs.  

You must use a propane tank that has a collar to protect the gas valve.

The tank system must be set up for vapor withdrawal.

The installation of this unit must adhere to local codes or Propane Storage and Handling Code, 

CSA B149.2.

SAFETY INFORMATION

Summary of Contents for AJ1192














Reviews: