Aj Aguiar FXD507, User Manual

Page: 19 / 24

- 19-
Flying Operation
Signal
pairing
Rise
Down
Left Turn
Right Turn
Forward
Backward
Hovering
Adjus
First, push ON/OFF key of helicopter to “ON” position, and push the remote controller
switch according to the direction of arrow, then Push up the left control lever to top and
immediately push down to bottom. While the indicator light of remote controller keeps
on, it means the signal is normal and can operate normally.
Push the left
control lever
down slowly, the
helicopter falls.
Push the right
control lever
towards left, the
helicopter will turn
left.
Push the right
control lever
towards right, the
helicopter will turn
right.
Push the right
control lever
upwards, the
helicopter will go
forward.
Push down the
right control lever,
the helicopter will
draw back.
(
Coach model key
)
Speed
transition
Lighting
control
When the left control lever sets in the middle position, the helicopter will fly in a stable
height. Stop driving the control levers, adjust the trimmer button can keep helicopter
hovering.
Push the left
control lever up
slowly, the heli-
copter flies up.
Without pushing the control levers, the helicopter will keep rotating or deviate the airline.
The trimmer button can adjust the flying. If the nose of helicopter rotates towards left,
push the trimmer button clockwise to adjust. Conversely, push the trimmer button
anticlockwise.
After signal pairing, the helicopter is flying in low speed condition. The head light is
flashing. Press the speed transition key, fast speed mode starts, flying speed up and the
head lights keep on. Press again, the fast speed mode converts to low speed mode.
When flying signal is normal, water lights flash. Press Light Switch, lights turn off.
Press again, lights flashing.