background image

60

59

CD MECHANISM EXPLODED VIEW  1/1

CD MECHANISM PARTS LIST 1/1

       1  9X-262-620-210    MOTOR CHASSIS ASSY
       2  92-626-907-010    GEAR(A)
       3  87-A90-468-010    PICK UP KSS-213C
       4  92-626-908-010    SHAFT SLED
       5  92-627-003-020    GEAR(B)(RP)

       A  97-621-255-150    SCREW+P2-3

1

2

COVER

3

4

5

SPINDLE MOTOR
                      (M1)

MOTOR C.B

A

(M2)

REF. NO

PART NO.

KANRI

DESCRIPTION

NO.

SPEAKER DISASSEMBLY INSTRUCTIONS

Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Remove the screws of each speaker
unit andthen  remove the speaker units.

Remove the grill frame and four pieces of rubber caps by pulling
out with a flat-bladed screwdriver. Remove the screws from hold
where installed rubber caps. Insert a flat-bladed screwdriver into
the position indicated by the arrows and remove the panel. Re-
move the screws of each speaker unit and then remove the speaker
units.

Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Turn the speaker unit to counter-
clockwise direction while inserting a flat-bladed screwdriver into
one of the hollows arround speaker unit, and then remove the speaker
unit. After replacing the speaker unit, install it turnning to clock-
wise direction unitil "click" sound comes out.

Type.1

Type.3

Type.2

TOOLS

1

Plastic head hammer

2

(

-

) flat head screwdriver

3

Cut chisel

How to Remove the PANEL, FR

1.

Insert the (

-

) flat head screwdriver tip into the gap

between the PANEL, FR and the PANEL, SPKR.  Tap
the head of the (

-

) flat head screwdriver with the plastic

hammer head, and create the clearance as shown in Fig-1.

2.

Insert the cut chisel in the clearance, and tap the head of

the cut chisel with plastic hammer as shown in Fig-2, to
remove the PANEL, FR.

3.

Place the speaker horizontally.  Tap head of the cut

chisel with plastic hammer as shown in Fig-3, and
remove the PANEL, FR completely.

Type.4

Fig-1

Fig-2

Fig-3

How to Attach the PANEL, FR

Attach the PANEL, FR to the PANEL, SPKR.  Tap the four
corners of the PANEL, FR with the plastic hammer to fit the
PANEL, FR into the PANEL, SPKR completely.

1

2

3

Summary of Contents for XR-M77













































Reviews: