manualshive.com logo in svg

Aiwa XR-M55, Operating Instructions Manual

Share
Download
Aiwa XR-M55 Operating Instructions Manual Download Page 27

To check the time remaining until the power is turned off
Press JOG MODE repeatedly until "SLEEP" is displayed. The remaining time is displayed for 3 seconds.

To cancel the sleep timer
Press JOG MODE repeatedly until "SLEEP" is displayed, then turn MULTI JOG within 3 seconds so that
"SLEEPoFF" appears on the display.

CLOCK AND TIMER (cont.)    pg. 16

SETTING THE TIMER

The unit can be turned on at a specified time every day with the built-in timer.

Preparation
Make sure the clock is set correctly. (See page 15).

1 Press JOG MODE repeatedly until "

¥" is displayed, then turn MULTI JOG within 2 seconds until "¥"

appears on the display. Then press ENTER within 6 seconds.
The time flashes.

                

If you press ENTER after 6 seconds, another operation may start.

2 Designate the timer-on time by pressing 

 or 

 then press ENTER.

To change the timer-on time by 30 minutes, press and hold down 

 or 

.

• MULTI JOG is also available instead of 

 and 

.

After you designate the timer-on time, one of the source names flashes on the display.

                

Summary of Contents for XR-M55




































Reviews:

No comments

Brands by name

Popular brands

Load more brands