15
En
Specifications
MAIN UNIT
TUNER
FM tuning range
87.5 MHz to 108 MHz
FM usable sensitivity (IHF)
13.2 dBf
FM antenna terminals
75 ohms (unbalanced)
AM tuning range
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
AM usable sensitivity
350 µV/m
AM antenna
Loop antenna
AMPLIFIER
Power output
5.5 W + 5.5 W (50 Hz - 20 kHz, THD
less than 1%, 6 ohms)
7 W + 7 W (1 kHz, THD less than
10%, 6 ohms)
Total harmonic distortion
0.15% (3.5 W, 1 kHz, 6 ohms, DIN
AUDIO)
Input
AUX IN: 600 mV
Outputs
SPEAKERS: 6 ohms or more
phones: 16 ohms or more
SUPER WOOFER: 0.85 V
CD PLAYER
Laser
Semiconductor laser (
λ
= 780 nm)
D/A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, 0 dB)
Harmonic distortion
0.08% (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
GENERAL
Power requirements
120 V AC, 60 Hz
Power consumption
22 W
Power consumption in standby mode
With ECO mode on: 1.6 W
With ECO mode off: 5.4 W
Dimensions (W
×
H
×
D)
166
×
162
×
256.2 mm
(6
5
/
8
×
6
1
/
2
×
10
1
/
8
in.)
Weight
2.5 kg (5 lbs 8 oz)
SPEAKER SYSTEM
Speaker system
2 way, bass reflex (magnetic
shielded)
Impedance
6 ohms
Dimensions (W
×
H
×
D)
166
×
157
×
224.5 mm
(6
5
/
8
×
6
1
/
4
×
8
7
/
8
in.)
Weight
0.8 kg (1 lbs 12 oz)
Specifications and external appearance are subject to change
without notice.
Poor radio reception
•Check antenna connection. Adjust the antenna to find the
best reception.
•Move unit and antenna away from other electric appliances
and cords.
The CD player works poorly
•Is the disc correctly inserted?
•Is the disc dirty?
•Is the lens affected by condensation? If so, wait
approximately one hour and try again.
The speaker lights do not turn on
•Are the speaker light cords connected properly?
•Is the speaker light setting on? (See "Turning the speaker
lights on and off" on page 9.)
Resetting the unit
If an unusual condition occurs in the display window, reset
the unit as follows:
1 Press
power
to turn off the power.
If the power cannot be turned off, disconnect the AC power
cord, then plug it in again.
2 Keep the dial pushed down (
s
) and press
power
on the
main unit.
Everything stored in memory after purchase is cleared.
