-56-
ELECTRICAL ADJUSTMENT -2/5
< MW ADJUSTMENT>
For FM adjustment, do wiring and connection as in the following.
5. MW IF Adjustment
Requirement
Measuring equipment: Oscilloscope or Millivoltmeter
Test point: TP8(Lch), TP9(Rch), GND
Adjustment point: L802
1) Adjust the setting of Standard Signal Generator (hereinafter S.S.G.) to 999KHz
of 30% variation.
2) Adjust the receiving frequency of the main unit at 1000KHz.
3) While looking at the waveform on the oscilloscope, reduce the output level all the
way (till a certain degree of is monitored through the oscilloscope).
4) Adjust L802 until the waveform of the oscilloscope reaches the maximum.
6. MW Tracking Adjustment
Requirement
Measuring equipment: Millivoltmeter
Test point: TP8(Lch), TP9(Rch), GND
Adjustment point: L954, L955
Repeat the adjustment 2 or 3 times from step 1 to 6 above.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299