background image

8

En

This unit plays back finalized CD-R/RW discs as well as audio
CDs.

Playing CDs

1

Press CD1 

z

OPEN/CLOSE to open the disc tray.

Place a disc with the label side up.
• When loading an 8-cm disc, place it on the inner circle

of the tray.

z

OPEN/CLOSE

Disc tray number

CD OPERATIONS

2

To play two or three discs, load the second and
third discs in disc tray 2 and 3, using CD2 and
CD3 

z

OPEN/CLOSE respectively.

Finally, close the disc tray by pressing 

z

OPEN/CLOSE.

After reading the loaded disc, "

" lights up at the

corresponding disc number 1-3 in the display. The
corresponding DISC DIRECT PLAY (CD1/CD2/CD3) also
lights up.

3

Press 

E

 to play all the discs.

Play starts from the currently selected disc (

j

 lights up

by the selected disc number in the display).

To play a single disc (single disc play)

Press the desired DISC DIRECT PLAY (CD1/CD2/CD3).
Only the selected disc number lights up in the display.
Pressing the DISC DIRECT PLAY repeatedly during play
changes the playback mode as follows.
Single disc play 

Y

 All disc play

Replacing disc during play

While one disc is playing, the other discs can be replaced
without interrupting play.
1 Press one of 

z

OPEN/CLOSE (CD1/CD2/CD3)

corresponding to the disc which is not being played.

2 Remove the disc and replace with another one.
3 Close the disc tray.

To stop play

Press 

s

.

To pause play

Press 

E

. Press again to resume play.

To  skip to the beginning of the current/preceding/
succeeding track

Press 

f

 or 

g

 repeatedly .

To search (playback in fast forward or reverse)

Hold down 

f

 or 

g

. Release at the desired point.

To select a track with the remote control (Direct play)

Press the numbered buttons to select a track.
- To select the 25th track, press +10, +10 and 5.
- To select the 11th track, press +10 and 1.

To change the display in playback mode

Press DISPLAY during play.

The display changes in the following order:

Track number being played and elapsed playing time
Remaining time of play

•Remaining time of play cannot be displayed during 

"

 

1

,

random or programmed play.

DISPLAY

SHIFT

f

,

g

s

E

0–10, +10

RANDOM/

REPEAT

PROGRAM

DISPLAY

DISC DIRECT 
PLAY

DISC DIRECT 
PLAY

f

,

g

E

s

z

OPEN/

CLOSE

01_04_09_XREC10_UC_En

02.3.15, 7:05 PM

8

Summary of Contents for XR-EC10

















Reviews: