16
ENGLISH
3
Press
r
or
t
repeatedly to
select a track to be added to the
program.
a
Selected track number (flashing)
b
Program order
4
Press P-MODE/ENT.
The selected track is stored in the
program.
Repeat steps 3 and 4 to program more
tracks.
5
Press
e
on the unit or
c
/
a
on
the remote control to start program
play.
To check the programmed tracks
Press P-MODE/ENT repeatedly before you
proceed to step 5. The number of each
programmed track appears in order of
playback.
To add tracks to the program
Repeat steps 1 to 4 when the PRGM is
displayed while the unit is stopped. Tracks
can be added to the end of the program.
When 24 tracks are programmed
“P-FULL” appears, and no more tracks can
be added.
To cancel program play
Press
s
during programming or while
program play is stopped.
Notes
• Program play is also canceled when the
disc compartment is opened or the auto
power off function turns the power off.
• You cannot go back to a previous track by
holding
r
pressed during program play.
• Repeat play can be performed during
program play.
Turning off the confirmation beeps
1
Perform steps 1 and 2 in “Basic
operating procedure” to select
“BEEP ON.”
2
Press
r
or
t
repeatedly to
select “BEEP OFF.”
3
Perform steps 4 and 5 in “Basic
operating procedure.”
To resume the confirmation beeps
Select “BEEP ON” in step 2.
OTHER FUNCTIONS
