Aiwa TV-CN202, Service Manual, Page: 6 / 33

6
(4) Turn over the rubber cap symmetrically on the left and
right. (See Figure 4)
Caution : Take great care not to damage the anode cap.
Fig. 4
(5) Fit your forefinger over the projection at the center of
the cap and hold the cap between your thumb and
middle finger. (See Figure 5-1)
(6) Apply the hook on one side to the anode button as
shown on the figure. (See Figure 5-2)
Caution : Check that the hook is held securely.
(7) Apply the hook on the other side to the anode button
as shown in Figure 5-3.
Fig. 5
Anode button
Fig. 5-2
Anode button
Hook
Hook
30˚
Anode button
Hook
Fig. 5-3