18
En
TIMER OPERATIONS
Sleep timer
Turns off the unit automatically after a specified time.
1
Press SHIFT+SLEEP on the remote control.
"
SLP
" appears on the display.
2
Press
f
or
g
repeatedly to set the sleep
timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 6 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
•MULTI JOG is also available in place of
f
or
g
.
Tip:
The display is dimmed while the sleep timer is active.
To check the remaining time until the unit turns off
Press SHIFT+SLEEP on the remote control. The remaining
time is displayed for 6 seconds.
To cancel the sleep timer
Press SHIFT+SLEEP twice on the remote control so that "
SLP
OFF
" is displayed.
Timer playback
Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.
1
On the remote control, press SHIFT+TIMER to
display "
PLAY
" and press ENTER.
If ENTER is not pressed within 6 seconds, you will exit
the timer setting mode and the previous setting, however,
is entered.
On the unit, press MODE repeatedly to display
"
TIMER
", and press ENTER within 4 seconds.
Then turn MULTI JOG within 6 seconds to select
"
PLAY
", and press ENTER twice within 4
seconds.
2
Press
f
or
g
to set the timer-on time, then
press ENTER or
a
SET.
3
Press
f
or
g
to select the source, then
press ENTER or
a
SET.
4
Press
f
or
g
to set the timer-activated
duration, then press ENTER or
a
SET.
With each press, the timer-activated duration changes in
5-minute steps between 5 to 240 minutes.
5
Press
f
or
g
to adjust the volume level
for timed playback, then press ENTER or
a
SET.
Adjustable range: 0 to 31
6
Prepare the source.
To play CD(s), load disc(s).
To play the radio, select the band and tune in to the desired
station.
To play a tape, insert the tape and select the deck.
To play external equipment connected to the VIDEO/AUX
jacks, set an external timer for the equipment so that its
playback begins at the same time.
7
Press POWER
6
STANDBY/ON to turn the unit
off.
At timer-on time, the unit turns on and plays the selected
source. After the specified timer-activated duration, the
unit turns off again.
Tip:
The display is dimmed while the timer playback is active.
•To stop timer setting in step 2 to 5, press
s
.
Timer standby mode is also canceled.
•Timer playback will not begin unless the unit is turned off
first.
•Connected equipment cannot be turned on or off by the built-
in timer of this unit. Use an external timer.
•MULTI JOG is also available in place of
f
or
g
.
•In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION is
also available to select the source.
In step 5, VOLUME
+
,
-
or VOLUME is also available to
adjust the volume level.
