manualshive.com logo in svg

Aiwa NSX-R10, Service Manual

Share
Download
Aiwa NSX-R10 Service Manual Download Page 7

 !

=  !  SAFTY PARTS

C

= Components marked

All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.

UNIT-NAME                           !  C  REF-NO    PARTS-NO              PARTS-NAME                                             SUFFIX&MODEL

-7-

ACCESSORIES PARTS LIST -1/1

                                                                               CX-SNR10        CX-SNR10
                                                                               EZSC1           KSC1
                       O AS1001  8C-NFA-916-010 IB,EZ(9L)S NSX-R10             a               .
                       O AS1001  8C-NFA-905-010 IB,K(E)S NSX-R10               .               b
                       O AS1002  87-A92-150-010 ANT,LOOP AM NO-CONT            a               b
                       O AS1003  87-A92-346-010 ANT,WIRE FM(FASTEN)            a               b
                       O AS1004  8C-NF8-702-010 RC UNIT,RC-CAS03(VS)           a               b
                       O AS1005  87-099-811-010 PLUG,ADPTR CONV(K)             .               b

Summary of Contents for NSX-R10






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands