background image

through the front speakers.

To select PHANTOM or 3 STEREO
Press DOLBY PRO LOGIC repeatedly until the desired Dolby Pro Logic mode is displayed. The DOLBY PRO
LOGIC mode is displayed cyclically as follows.

To adjust the balance of connected speaker sound levels
Carry out steps 2 to 4 of "ADJUSTING SPEAKER LEVEL BALANCE" (page 23).

• Depending on the sound source and/or listening conditions, a surround effect may not be obtained even when the
Dolby Pro Logic is on.

• The full DOLBY PRO LOGIC effect cannot be obtained when using software without 
mark. In this case, use the SURROUND system instead. (See page 12.)
• The DOLBY PRO LOGIC is automatically cancelled when:
- the ECHO level is changed.
- the SURROUND system or BBE is turned on.
- the headphones are plugged in.
- the Karaoke function is turned on.
- the 5.1 CH (page 30) is selected.
• Set the microphone volume to OFF while the DOLBY PRO LOGIC is on. Otherwise, the DOLBY PRO LOGIC
sound cannot be reproduced correctly.

KARAOKE        pg. 25

MICROPHONE MIXING

Two microphones (not supplied) can be connected to this unit, allowing you to sing along to music sources.
Use microphones with mini plugs  (Ø3.5 mm, 1/8 inch).

1 Connect your microphones to MIC 1 and MIC 2 jacks.

Summary of Contents for NSX-MTD9



































































Reviews: