en
14
15
YOU CAN ENJOY MEDIA FILES SAVED ON
AN USB DEVICE BY CONNECTING THE USB
DEVICE TO THE USB PORT OF THE UNIT
1.
Connect the USB device to the USB
port of the unit.
2.
Select the
USB
mode by pressing
CD/USB
on your remote control.
In the unit, press
SOURCE
button and
select the
CD MODE
. Then wait until the
unit search for a playable CD. If there isn’t
a CD inside the unit it will jump directly to
the
USB
mode.
3.
Select a file you want to play using
/ / / or instead you may select
directly the file with the numerical keys.
4.
Press on the remote control or on the
unit to start the playback.
5.
Turn the
VOLUME
knob or press
VOL+/ VOL-
to increase or decrease
volume level.
6.
Press button on the unit or on the
remote control to
STOP USB
playback.
7.
Before disconnecting the
USB
device,
change the source by pressing
SOURCE
button.
IMPORTANT:
Prior to use
Bluetooth
function, your micro system should be paired firstly with your
Bluetooth
device.
(“Pairing” means establish connection between Bluetooth devices such as MOBILE PHONE, TABLETS,
PC, ETC).
ººº
BLUETOOTH
OPERATION
COMPATIBLE USB DEVICE
MP3 PLAYER:
Flash type MP3 player.
USB FLASH DRIVE:
Devices that support USB 2.0 or USB 1.1.
The USB function may not be available
depending on device.
Device which require additional program
installation when you have connected it to
a computer, are not supported.
IMPORTANT:
- Switching from CD to USB from the unit
can take a few seconds.
- Do not extract the USB device while in
operation.
- For a large USB capacity, it may take longer
than a few minute to be searched.
- To prevent data loss, back up all data.
- If you use a USB extension cable or USB
hub, the USB device is not recognized.
- Using NTFS file system is not supported
(Only FAT (16/32) file system is supported).
- This unit is not supported when the total
number of files is 1000 or more.
- External HDD, locked devices or hard type
USB devices are not supported.
THE UNIT CAN BE USED TO PLAY THE MUSIC
FROM MANY TYPES OF EXTERNAL DEVICE
1.
Connect by using a 3.5mm
Male-to-Male Stereo cable
the external
device to the
AUX
connector/ jack of the
unit.
2.
Press
SOURCE
repeatedly to select the
LINE IN
mode.
3.
Start playback on the external audio
device. Adjust the volume on the audio
device (do not set the volume to a
high level in order to avoid distortion).
You may also adjust the volume on the
appliance. To control playback function,
use the controls on the external audio
device.
AUXILIARY INPUT OPERATION
USB OPERATION
PROGRAM MODE
The operation of
PROGRAM MODE
are
as the same as that of
CD / MP3
.
Please refer to
BASIC OPERATION
CD/MP3
section paragraph
PROGRAM:
CREATING YOUR OWN PLAYLIST
.
Notes:
•
The effective range of
Bluetooth
devices is 10 meters. Once paired, your device should connect
to the
MSBTU-300
.
(fig. 1)
(fig. 2)
1.
Press the
SOURCE
button to switch into
the
BLUETOOTH MODE
.
(fig. 1)
2.
In
Bluetooth
mode, Red and Blue LED
indicators will flash alternatively and a
voice prompt will announce
Bluetooth
pairing mode.
Then the micro system will search automatically
for
Bluetooth
devices.
3.
Turn on
Bluetooth
functionality on your
device and make it discoverable (see your
devices instructions to add or setup a
Bluetooth
device).
4.
Search for
Bluetooth
equipment
MSBTU-300
is your micro system identification.
(fig. 2)
Red status indicator switches to blue
light which means that devices are
successfully paired.
(During the paring,
if the Bluetooth Version is below 3.0, you
need to input code”0000”)
.
Your
Bluetooth
device stores the micro
system unique identification at the same
time.