Aiwa MM-RX400 Operating Instructions Manual Download Page 13

Page: 13 / 64

ENGLISH

Preparing the MM-RX400 player

Charging the battery

Before using the rechargeable battery for
the first time, charge it for about 8 hours.

Insert the

r e c h a r g e a b l e
battery into the
supplied battery
charger.

Plug the battery

charger into a wall
outlet.

Recharging a completely drained battery
takes about 8 hours.
When the battery has finished charging,
remove it from the battery charger and
disconnect the battery charger from the
wall outlet.

Installing the battery

Remove the battery compartment

cover.

Install the rechargeable battery

with the

and

poles correctly

aligned.

Replace the battery compartment

cover.

Battery indicator

The battery indicator shows the power
remaining.

Full

Empty

When

lights, recharge the battery.

If you continue to use the MM-RX400
player after

lights, the “LOW BATT”

indicator appears, operation stops, and
the MM-RX400 player beeps.

Note on the rechargeable battery

• Use only the supplied battery charger to

recharge the battery.

• Do NOT carry the battery in a pocket or

handbag together with metal objects
such as pendants or key holders.

• Do NOT short-circuit the terminals by

placing a metal object across them.

• Do NOT try to disassemble the battery,

heat it, or put it in water.

• The supplied rechargeable battery can

be recharged approximately 300 times.

Summary of Contents for MM-RX400

































































Search results

Summary of Contents for MM-RX400

Reviews:

Aiwa MM-RX400, Operating Instructions Manual, Page: 13 / 64

Search results

Summary of Contents for MM-RX400

Reviews: