20
En
Basic recording
Use only type I (normal) tapes. Deck B is the recording deck.
1
Insert the recordable tape in deck B.
Press
z
PUSH EJECT/CLOSE to open the outer cassette
holder, and insert with the exposed side down and the
side to be recorded on facing out from the unit.
Wind up the tape to the desired point if needed.
2
Prepare the source.
To record CD(s), select the CD function and load disc(s).
To record a radio broadcast, tune in to the desired station.
To record a tape, insert the source tape in deck A and
select the TAPE function (deck A).
To record from connected external equipment, select the
VIDEO (MD) function and prepare the equipment.
3
Press REC PAUSE/START.
Recording is paused and ready to start.
4
Press REC PAUSE/START again to begin
recording.
If your source is CD, press
c
.
If your source is connected equipment, manually start
playback of the source.
•Volume or tone adjustment does not affect recording.
•“
NO TAB
” is displayed if you attempt to record a tape
with the tab broken off.
To stop recording
Press
s
.
To pause recording
Press REC PAUSE/START. Press again to resume.
To record a selected set of tracks from a CD
Program the desired tracks (see “Programmed playback”) and
then press REC PAUSE/START twice and then press
c
.
To erase a tape
1 Insert the tape in deck B. Set the tape to the desired point if
needed.
2 Press TAPE A/B to select “
TAPE B
”.
3 Press REC PAUSE/START.
TAPE A/B
TAPE A/B
Deck B
PUSH
EJECT/CLOSE
REC PAUSE/
START
SHIFT
