2
2
Connection
Important
Connect the AC cord to the AC outlet after all connections are complete.
Basic connections
When the TV is connected to the unit only with the antenna cable
You need to set the unit's RF output channel to a channel that is not
used for broadcasts in your area. The default is channel 3.
To change the RF output channel setting, make sure the AC cord is
plugged in to the AC outlet, but keep the power turned off. Press and
hold down either of the two CHANNEL buttons at the front of the unit
until the display in the LCD changes.
When displaying the output from this unit on the TV, select this
channel on the TV.
CHANNEL
2
Connect the RF.OUT DVD/
VCR OUT jack of the unit and
the TV's antenna input
connector with the supplied
antenna cable.
1
Connect the TV
antenna cable (not
supplied) to the
ANT.IN jack of the
unit.
AC outlet
Antenna input
connector
TV
3
If your TV has audio/video input
jacks, connect these jacks and
the LINE OUT jacks of the unit
with the supplied audio and video
cables.
4
Connect the AC cord
to the AC outlet.
Audio/video
input jacks
Video cable
(supplied)
Audio cable
(supplied)
Antenna cable
(supplied)
TV antenna cable (not supplied)
AC cord
L
R
AUDIO
VIDEO
LINE 1
IN
ANT.IN
DIGITAL
AUDIO OUT
COAXIAL
DVD EXCLUSIVE OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
VIDEO OUT
RF.OUT
DVD/VCR
OUT
LINE
OUT
L
R
Cb
Y
Cr