manualshive.com logo in svg

Aiwa FD-LM88, Service Manual

Share
Download
Aiwa FD-LM88 Service Manual Download Page 39

53

TEST MODE

1. CD Test Mode

1-1. How to Start Up the CD Test Mode

While pressing the “CD OPEN/CLOSE” button, connect the AC plug to the power outlet.
When the CD test mode is started up, When the CD test mode starts up, all displays turn on.

Note:

When the PANEL, TOP has been removed for each CHAS, GEAR, be sure to short pin-4 and pin-5 of the connector CN3 on
the CD board in order to recognize that the CD lid is closed.

1-2. Releasing the CD Test Mode

Remove the shorting between pin-4 and pin-5 of the connector CN3 on the CD board to return to the original setup.
Then press the POWER button or the FUNCTION button, or remove the AC plug from the power outlet to release the CD test
mode.

1-3. Function Description of the Test Mode

Note:

If the focus search operation is continued for 10 minutes or longer, heating of the driver IC is accumulated to trigger the
protection circuit that will stop operation of the CD system.  .Turn off the main power and re-start operation about 10 minutes
later.

MODE

Start mode

Search mode

Play mode

Traverse mode

Sled mode

Operation

Starting up the

test mode

9

2

;

6

5

Indication on display

CD TEST

CD

Track No. and

playing time are

displayed

Track No. and

playing time flash

CD TEST

Function

Continuous focus searching.

The pickup lens repeats the full-

swing up-down motion * Note

Normal playback.

When the TOC reading is not

possible, the same movement as

in the search mode.

Playback PAUSE mode

The pickup moves to the

innermost track

The pickup moves to the

outermost track

Contents

Check APC circuit.

Laser current measurement.

Focus error waveform check.

Focus servo.

Tracking servo.

CLV servo.

Sled servo.

Tracking servo OFF.

Sled servo.

Check operation of the

mechanism.

All manuals and user guides at all-guides.com

Summary of Contents for FD-LM88



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands