Operation
Pairing two speakers
Powering ON/OFF
Press and Hold "ON/OFF" button for 2 seconds to power on and power off. The battery
capacity indicator will time-out after 10 minutes; press any button and the indicator will light
again.
Pairing
The unit will automatically go into “Pairing Mode” when it is powered on, the blue LED light
will blink to indicate you have entered pairing status.
In your device’s Bluetooth settings, select “Aiwa Exos-3.” Once paired, an audible prompt will
indicate the successful pairing and the blue LED light will illuminate solidly once paired.
Press and hold the Bluetooth button for 3 seconds to disconnect the current device and pair
to a new one.
Begin Streaming Music
Press Power Button to start playing music,
Power Button press again to pause music.
Press and Hold Button 2 seconds to play the next track.
Press and Hold Button 2 seconds to restart the current track. Press either Button or
Button for volume control.
Making and Receiving Phone Calls
Use the built-in microphone to make and receive calls, using the device as a speakerphone.
Short press Bluetooth to accept and end a call.
To reject a call, press and hold Bluetooth
Aux Mode
Plug in the supplied 3.5 mm cable into the unit, connect the other to your device. The light
green LED will light to indicate “Aux” mode.
In Aux Mode,
Press Button to increase the volume
Press Button to lower the volume
Press Button to mute the speaker
Skip, back and play/pause are controlled on your phone only while in Aux Mode
Two Exos-3 speakers can be linked together to enjoy wireless stereo sound.
1. Make sure the speakers do not have an active Bluetooth connection (disconnect by
pressing the Bluetooth button if needed.)
2. Power on both speakers, press the Stereo Pair Button on the one you wish to be the
primary speaker. The secondary speaker will automatically connect and you’ll hear an
audible prompt when pairing is successfully completed.
3. The primary speaker’s blue LED will blink (this speaker will play the left channel audio)
and the secondary speaker’s blue LED will illuminate continuously (this speaker will play
the right channel audio.)
4. Connect your phone or tablet to the primary speaker via Bluetooth or Aux input to the
primary speaker.
Notes:
• The two speakers will remain paired even when phones are disconnected, to disconnect
the secondary speaker, simply press the button on the primary speaker.
• While two speakers are paired, some controls will only be operational on the primary
speaker.
Power bank function
The USB output can be used for charging the speaker is on or off. When the charging
device is fully an audible indicator will be heard, and charging will cease.
Charging
1. Battery life: The battery will last approximately 15 hours when used at 50% volume, or 9
hours at 80% volume.
2. Charging additional devices from the USB port will reduce battery life accordingly.
3. The power indicator will blink while charging. The 4 orange LEDs indicate current battery
level. When all 4 are fully illuminated, the device is completely charged.
4. Charge time: Approximately 4 hours from fully depleted to fully charged.
Notes
The device should be fully charged before long-term storage and recharged every 3
months to ensure the battery operates at full capacity.
Button Functions
3. Stereo Pair Button
Pairs two Exos-3 speakers for stereo sound
1. Button:
Short press to increase volume (or press and hold to advance to the
next track)
2. Button:
Short press to lower the volume (or press and hold to return to the
start of the current track)
4. Bluetooth Button:
Press and hold to pair with a new device
5. Power Button:
Press and hold the button to turn the speaker on/off (or short press for
play/pause)
6. USB-A Port:
Charges device using a USB-A charger
7. USB-C Port:
Charges Exos-3 via using a USB-C charger
8. Aux-In:
Connect to the speaker via 3.5mm aux-in cable
9. Bluetooth Indicator:
Shows Bluetooth connection status
10. Charge Indicator:
Shows remaining battery power
11. Aux Indicator:
Illuminates when Aux input is connected