-41-
ELECTRICAL ADJUSTMENT-5/6
16. Record/Playback Frequency Response Characteristics Adjustment (DECK2)
Conditions
O
Measuring equipment: Milli-volt meter
Audio signal generator
(Low frequency oscillator)
Attenuator
Test tape: TTA-602 (NORMAL)
Test point: TP8 (L-ch), TP9 (R-ch)
Input point: AUX (1 kHz/8 kHz)
Adjustment point: SFR451 (L-ch), SFR452 (R-ch)
1) Connect a milli-voltmeter CH1 to TP8 (L-ch) and CH2 to TP9 (R-ch).
2) Connect an oscillator output to an attenuator. Connect an attenuator output to AUX of the NSX-RV
15
.
3) Insert the test tape (TTA-602) into DECK2 and record the 1 kHz signal from AUX.
4) Adjust the attenuator so that TP8 and TP9 output level become 10 mV.
5) Record the 1 kHz signal and 8 kHz signal alternately.
6) Adjust SFR451 (L-ch) and SFR452 (R-ch) so that the 8 kHz playback output level is within 0
±
1dB with respect to the 1 kHz output level that
is the reference output.
17. Record/Playback Sensitivity Check (DECK2)
Conditions
O
Measuring equipment: Same as item 16.
Test tape: TTA-602 (NORMAL)
Test point: TP8 (L-ch), TP9 (R-ch)
Input point: AUX (1 kHz)
1) Insert the test tape (TTA-602) into DECK2 and record the 1 kHz signal from AUX.
2) Adjust the attenuator so that TP8 and TP9 output level become 100 mV.
3) Play back the 1 kHz portion and check that the 1 kHz playback output level is within 0 dB
±
2.5dB with respect to the record mode output
level.
ATTENUATOR
INPUT
OUTPUT
AUX(L)
AUX(R)
OUTPUT
AUDIO SIGNAL
GENERATOR
TP8
TP9
AC MILLIVOLTMETER
CH2
CH1
SET
(1KHz, 1V)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
