background image

15

En

Adjust the volume and tone for timer playback.

If the volume level is set to 21 or higher, it is automatically
turned down to 20 when the unit is turned on by the timer.

Prepare the source.

To play CD, insert a disc.
To play the radio, select the band and tune in the desired
station.
To play external equipment connected to the VIDEO/AUX
IN jacks, set an external timer for the equipment so that
playback begins at the same time.

Press POWER 

6

STANDBY/ON to turn the unit

off.

"

5

" remains on the display to indicate the timer standby

mode (when ECO mode is deactivated).
At timer-on time, the unit turns on and plays the selected
source. After the specified timer-activated duration, the
unit turns off again.

•Timer playback will not begin unless the unit is turned off

first.

•Connected equipment cannot be turned on or off by the built-

in timer of this unit. Use an external timer.

To check the timer setting

Hold down SHIFT and press TIMER.
The timer-on time, the source and the timer-activated duration
are displayed for 7 seconds.

To change the timer setting

Reset the timer again.

To turn off the timer

On the main unit

Press MODE to display "

 

PLAY

" and turn

VOLUME/MULTI JOG so that "

 OFF

" is displayed. Then

press ENTER. "

5

" disappears from the display.

On the remote control

Hold down SHIFT and press TIMER repeatedly until
"

 OFF

" is displayed. "

5

" disappears from the display.

Tip:

Your timer setting is retained even if the timer is turned off.
Next time the timer is turned on, you can change your previous
setting, or simply use the same setting again.

Summary of Contents for CX-LX7



















Reviews: